TrendForm Electrical Components
To order any of the products on this page, please specify the following details:
- Catalog Number
Raceway Assemblies - Single Block Raceways
| Length | Catalog Number | List Price |
| 18″ | P-SBR18 | $132.00 |
| 24″ | P-SBR24 | $140.00 |
| 30″ | P-SBR30 | $147.00 |
| 36″ | P-SBR36 | $155.00 |
| 42″ | P-SBR42 | $163.00 |
| 48″ | P-SBR48 | $176.00 |
| 54″ | P-SBR54 | $185.00 |
| 60″ | P-SBR60 | $194.00 |
| 66″ | P-SBR66 | $204.00 |
| 72″ | P-SBR72 | $213.00 |
- Raceway assembly includes mounting bracket(s) and hardware, for use in electrifying panel frames.
- 8 wire 4 circuit 15 amp system.
- Extension has 3 1/2″ of extra flex.
- UL recognized. CSA certified.
Raceway Assemblies - Double Block Raceways
| Length | Catalog Number | List Price |
| 24″ | P-DBR24 | $178.00 |
| 30″ | P-DBR30 | $218.00 |
| 36″ | P-DBR36 | $237.00 |
| 42″ | P-DBR42 | $248.00 |
| 48″ | P-DBR48 | $257.00 |
| 54″ | P-DBR54 | $267.00 |
| 60″ | P-DBR60 | $277.00 |
| 66″ | P-DBR66 | $287.00 |
| 72″ | P-DBR72 | $297.00 |
- Full Door Unit with Frame include top cap, baseplates, finished end, (2) vertical door jams, C-clip and A-clips.
- A-clips and C-clip are used to connect frame to adjacent frame or connector post.
- Pocket door shipped pre assembled
Pass Through Cable
| Length | Catalog Number | List Price |
| 18″ | P-PT18 | $112.00 |
| 24″ | P-PT24 | $120.00 |
| 30″ | P-PT30 | $128.00 |
| 36″ | P-PT36 | $136.00 |
| 42″ | P-PT42 | $144.00 |
| 48″ | P-PT48 | $159.00 |
| 54″ | P-PT54 | $168.00 |
| 60″ | P-PT60 | $177.00 |
| 66″ | P-PT66 | $186.00 |
| 72″ | P-PT72 | $195.00 |
- Pass Through Cable in non powered panel situation.
- 8 wire 4 circuit 15 amp system.
- Includes mounting brackets and hardware.
- UL recognized. CSA certified.
Ceiling Feed/End of Run Feed
| Length | Catalog Number | List Price |
| 144″ | P-CPF144 Ceiling Feed | $209.00 |
| 72″ | P-EPF72 End of Run Feed | $225.00 |
- Used to introduce power to the electrical system from the ceiling electrical source through a power pole or to the end of panel run from a wall box.
- Custom lengths available. Consult factory for longer custom lengths.
- Refer to Electrical Applications section for specifying details.
- UL recognized. CSA certified.
Side Mounted Base Power Feed
| Length | Catalog Number | List Price |
| 72″ | P-BF72 | $249.00 |
- Used to introduce power to the electrical system from the wall or floor electrical source through a power pole or to the simplex plug of a power module.
- Swivels for left or right handed applications.
- Custom lengths available. Consult factory for longer custom lengths.
- Refer to Electrical Applications section for specifying details.
- For Power Feed in San Francisco, use BE08892 3 MTLC E-(size)
- UL recognized. CSA certified.
Duplex Receptacle
| Catalog Number | List Price |
| P-DR1 | $26.00 |
| P-DR2 | $26.00 |
| P-DR3 | $26.00 |
| P-DR4 | $26.00 |
- Duplex receptacle plug into raceway block to provide outlet source.
- Circuits available: 1, 2, 3 and 4 (dedicated).
- 8 Wire Circuit, 15amp
- Available Finish: Black
- UL recognized. CSA certified.
Power - Data Center
| Catalog Number | List Price |
| P-PDC | $472.00 |
- Two 15 amp simplex receptacles to accept standard power cords or AC adapters.
- Two ports available for the installation of voice/data.
- Work surface mounted.
Voice / Data Adapter Kit
| Catalog Number | List Price |
| P-VDAK | $3.00 |
- Adapter kit made to accept most couplers and jacks.
- Used with Power Data Center and Adapter Face Plate.
Voice / Data Plate
| Catalog Number | List Price |
| P-FP | $3.00 |
- VDP is used to finish data / voice installations.
- Used with electrical base plates and mid-line tiles.
Blank Voice / Data Plate
| Catalog Number | List Price |
| P-BVP | $2.00 |
- Used with electrical base plates and mid-line tiles.